Advertisement
you input the wrong password ten times, the display will turn off automatically. After inputting
the right password, the display will prompt you to input a new password. The following
procedure is the same as "Starting Password". After changing the password, the display will
exit automatically back to the original interface within two seconds.
Cancel password
Enter the "Start Password" interface and select "OFF" Next, the display will prompt you to
input the current password in the interface. If you input the wrong password ten times, the
display will turn off automatically. After inputting the correct password, it will prompt success
for cancelling password required start-up in the interface. After cancelling the password, the
display will exit automatically back to the original interface within two seconds.
(12) "Set Clock"- time setting
Select "Set Clock" in the "Display Setting" interface. The time is represented in the 24-hour
system. The cursor will stay at the first digit of the clock. Press the LEVEL+ and LEVEL-
buttons to change the selected digit. Press the MENU button to advance to the next digit.
After setting the correct time, press the MENU button again to save the setting and exit back
to the "Display Setting" interface.
Error Code Definition
The DPC18 display can show e-bike faults. When a fault is detected, the wrench icon will be
displayed. One of the following error codes will be displayed.
Advertisement
