Advertisement
Normal Operation
On/off switch
To turn on the display, press and hold the ON/OFF button. Press and hold the ON/OFF button
again to turn off the display.
If the controls are not operated and the bike is not used for 5 minutes (this time can be set in
"Auto Off") the display will automatically turn off. If the password function of the display is
activated, you will need to input the correct password to enter the normal display interface.
Power assistance level select
With the display powered on, briefly press the LEVEL+ or LEVEL- buttons to switch the level
of power assistance. The lowest level is Level 0, the highest Level 5. When the display is on,
the default mode is Level 1. "Level 0" means no power assistance.
Switch between Distance Mode and Speed Mode
Briefly press the MODE button to switch the display between the distance, speed and other
information. Information will cycle through in the following order: signal-trip distance (TRIP) →
total distance (ODO) → maximum speed (MAX) → average speed (AVG) → remaining
distance (RANGE) → energy consumption (CALORIES) → time (TIME). The energy
consumption unit of CALORIES means kCal.
Advertisement
