Advertisement
Resetting Single Trip Distance (TM ) and Single Riding Time (DST)
After the display has been powered on for 5 seconds, hold the UP and DOWN buttons at the
same time. The TM and DST readings on the screen will flash. Tap the POWER button shortly
to clear the display. If you do not tap the POWER button within 5 seconds the screen will
automatically return to Display 1, and the data will be preserved.
Throttle Display
When you use the throttle, the THROTTLE icon will be displayed
PAS Display
When using the motor's Power Assist features, the PAS icon will be displayed.
Cruise Control Function
To use this function, you must activate in in the settings menu – instructions on how to
perform this are at the end of this manual. When at a riding speed of greater than 7km/h and
when PAS is lit up on the screen, hold the DOWN button to enter Cruise Control mode. The
motor will maintain the approximate speed which you are at when entering cruise control.
Brake, pedal or press down any button to exit this.
Battery Capacity Meter
When the battery capacity is over 70%, the four power displays of the meter are lit. When the
battery capacities drop, the four power displays turn off in the order below. When power
capacity is less than 15%, all four power displays are turned off. If the controller is powered off
due to a voltage shortage, the power display frame flashes, indicating the bike has had a
voltage shortage and is waiting for shutdown.
Advertisement
