SE-GRM-series Ground-Reference one output relay with isolated normally open and normally Module. Table 1 lists the SE-601 trip levels and fault- closed contacts for use in independent control circuits. resistance values for 24-, 48-, 125-, 250-, 500-, 780-, and Additional features include LED power and faulted-bus 1000-Vdc systems.
NOTES: 1. DIMENSIONS IN MILLIMETRES (INCHES). 2. MOUNTING SCREWS: M4 OR 8-32. 3. OVERALL DIMENSIONS WHEN MOUNTED ON DIN EN50022 35 mm x 7.5 mm TOP-HAT RAIL. 4. ADJUSTMENT KNOBS ARE REMOVABLE. BOTTOM FIGURE 1. SE-601 Outline and Mounting Details.
2.3.1 P OWER 3.1 SE-601 The green LED labelled PWR indicates presence of the An SE-601 can be surface or DIN-rail mounted. See supply voltage. Fig. 1. Panel mounting requires a PMA-55 or PMA-60 Panel-Mount Adapter. See Figs. 6 and 7.
Page 6 SE-601 DC Ground-Fault Monitor Rev. 2-B-073014 SE-GRM780 TO SE-GRM1000 91.7 14.1 63.5 78.5 (3.61) (2.50) (3.09) (0.56) S E - G R M X X X XXX VDC GROUND REFERENCE MODULE C A U T I O N X X X V...
Page 7 SE-601 DC Ground-Fault Monitor Rev. 2-B-073014 109.0 (4.29) 85.0 PANEL THICKNESS (3.35) 1.6 (0.06) TO 4.8 (0.19) LITTELFUSE STARTCO DC GROUND-FAULT MONITOR SE-601 TRIP LEVEL (mA) TIME (s) TEST RESET BRACKET 55 mm (2.2) WIDE MONITOR BEZEL FRONT VIEW SIDE VIEW 85.0...
ANALOG % CURRENT METER FRONT SIDE REAR FIGURE 8. PGA-0500 Analog Percent Current Meter. memory. The current revision of the SE-601 can directly 4. SE-601 C OMPATIBILITY replace previous revision-00 units. The hardware- The current SE-601 has been enhanced with the...
Page 10 SE-601 DC Ground-Fault Monitor Rev. 2-B-073014 ac ........2,000 VA Resistive, 5. T ECHNICAL PECIFICATIONS 875 VA Inductive 5.1 SE-601 (PF = 0.4) Supply: (Subject to maximums of 8 A and 250 Vac/ 0U Option ......5 VA, 120 to 240 Vac...
SE-601 that is determined by Littelfuse Startco to be shown in Fig. 9. Select a trip current on the SE-601, defective if it is returned to the factory, freight prepaid, and slowly vary the resistance until the monitor trips.
Page 14 SE-601 DC Ground-Fault Monitor Rev. 2-B-073014 UNGROUNDED DC SYSTEM SE-GRMXXX L1/(V+) L2/(V-) L2/N SE-601 REMOTE RESET GROUND FAULT ANALOG LEAKAGE OUTPUT PGA-05CV PGA-0500 FIGURE 10. System Ground-Fault Test. TABLE 3. G ROUND- AULT- ECORD ESULTS Retain this record for the authority having jurisdiction.
PPENDIX Revision history updated. 2-A-041913 EVISION ECTION Fig. 2 updated to include PGA-05CV. ECTION Environment section updated to include Fahrenheit temperature range. SE-601 dimensions added. PPENDIX Revision history added. RODUCT EVISION ISTORY EVISION Firmware: Improved operation of front-panel test button.
Page 20
Page 16 SE-601 DC Ground-Fault Monitor Rev. 2-B-073014 The page intentionally left blank.