Maintenance
NOTE:
For disposal of used oil, consult your Yamaha
dealer.
5.
With the outboard motor in a vertical po-
sition, and using a flexible or pressurized
filling device, inject the gear oil into the
gear oil drain screw hole.
Recommended gear oil:
Hypoid gear oil SAE#90
Gear oil quantity:
F6AMH 150.0 cm³ (5.07 US oz) (5.29
Imp.oz)
F8CMH 150.0 cm³ (5.07 US oz) (5.29
Imp.oz)
FT8DE 370.0 cm³ (12.51 US oz)
(13.05 Imp.oz)
FT8DEP 370.0 cm³ (12.51 US oz)
(13.05 Imp.oz)
FT8DMH 370.0 cm³ (12.51 US oz)
(13.05 Imp.oz)
6.
Put a new gasket on the oil level plug.
When the oil begins to flow out of the oil
level plug hole, insert and tighten the oil
level plug.
7.
Put a new gasket on the gear oil drain
screw. Insert and tighten the gear oil
drain screw.
66
EMU29302
Cleaning fuel tank
EWM00920
WARNING
Gasoline is highly flammable, and its va-
pors are flammable and explosive.
If you have any question about properly
G
doing this procedure, consult your
Yamaha dealer.
Keep away from sparks, cigarettes,
G
flames, or other sources of ignition
when cleaning the fuel tank.
Remove the fuel tank from the boat be-
G
fore cleaning it. Work only outdoors in
an area with good ventilation.
Wipe up any spilled fuel immediately.
G
Reassemble the fuel tank carefully. Im-
G
proper assembly can result in a fuel
leak, which could result in a fire or ex-
plosion hazard.
Dispose of old gasoline according to lo-
G
cal regulations.
1.
Empty the fuel tank into an approved con-
tainer.
2.
Pour a small amount of suitable solvent
into the tank. Install the cap and shake
the tank. Drain the solvent completely.
ZMU02065