PT-FW300NTU / PT-FW300NTE / PT-FW300NTEA / PT-FW300U / PT-FW300E / PT-FW300EA / PT-F300NTU / PT-F300NTE / PT-F300NTEA / PT-F300U / PT-F300E / PT-F300EA
8.11. Removal of S2-P.C.Board
1. Remove the front cover according to the steps 1 through 6
in the section 8.10. "Removal of S1-P.C.Board".
2. Disconnect the connector between S1-P.C.Board and S2-
P.C.Board.
3. Unscrew the 2 screws and remove the S2-P.C.Board.
8.12. Removal of WL-P.C.Board
1. Remove the upper case according to the section 8.2.
"Removal of Upper Case".
2. Unscrew the 3 screws and remove the WL-P.C.Board.
Note:
WL-P.C.Board and A-P.C.Board are connected with the
connector. Do the removal work carefully.
8.13. Removal of Z-P.C.Board
1. Remove the A-P.C.Board block according to the steps 1
through 4 in the section 8.3. "Removal of A-P.C.Board".
2. Unscrew the 3 screws and remove the speaker block.
All manuals and user guides at all-guides.com
3. Unscrew the 2 screws and remove the Z-P.C.Board block.
4. Unscrew the 2 screws and remove the Z-P.C.Board.
8.14. Removal of B/Q-Module
1. Remove the A-P.C.Board block according to the steps 1
through 4 in the section 8.3. "Removal of A-P.C.Board".
2. Open the front door.
3. Unscrew the 1 screw and remove the front cover (inside).
4. Unscrew the 1 screw and release the grounding terminal.
5. Unscrew the 2 screws and remove the power separation
wall.
6. Remove the front cover.
18