Removal Of D-P.c.board; Removal Of F-P.c.board; Removal Of G-P.c.board; Removal Of K1- And K2- P.c.boards Block - Panasonic PT-FW300NTU Service Manual

PT-FW300NTU / PT-FW300NTE / PT-FW300NTEA / PT-FW300U / PT-FW300E / PT-FW300EA / PT-F300NTU / PT-F300NTE / PT-F300NTEA / PT-F300U / PT-F300E / PT-F300EA
fittings. Be careful with handling.
8. Disconnect the flexible cable between G-P.C.Board and A-
P.C.Board (A20).
9. Disconnect the connector between R-P.C.Board and A-
P.C.Board (A27).
10. Unscrew the 2 screws and remove the attachment metal
fittings for WL-P.C.Board.
11. Unscrew the 10 screws and remove the connector metal
fittings.
Notes:
· R-P.C.Board and G-P.C.Board are attached on the
connector metal fittings. Be careful with handling.
8.4.

Removal of D-P.C.Board

1. Remove the upper case according to the section 8.2.
"Removal of Upper Case".
2. Unscrew the 2 screws and remove the D-P.C.Board.
All manuals and user guides at all-guides.com
8.5.
1. Remove the ACF drive unit according to the section 8.25.
"Removal of ACF Drive Unit".
2. Unscrew the 2 screws and remove the F-P.C.Board.
8.6.
1. Remove the A-P.C.Board block according to the steps 1
through 4 in the section 8.3. "Removal of A-P.C.Board".
2. Unscrew the 2 screws and remove the connector dustproof
cover.
Note:
3. Disconnect the flexible cable between G-P.C.Board and A-
P.C.Board (A20).
4. Unscrew the 5 screws and remove the G-P.C.Board.
8.7.
1. Remove the lamp unit according to the section 8.16.
"Removal of Lamp Unit".
2. Remove the power block according to the steps 1 through
16

Removal of F-P.C.Board

Removal of G-P.C.Board

· R-P.C.Board is attached on the connector metal
fittings. Be careful with handling.
Removal of K1- and K2-
P.C.Boards Block