Advertisement
KRF-V6200D/V7200D
AUDIO section
Rated output power during STEREO operation
KRF-V7200D : (63 Hz – 20 kHz, 0.7% T.H.D., at 6 Ω)
....................................................................100 W + 100 W
KRF-V6200D : (63 Hz – 12.5 kHz, 0.7% T.H.D., at 6 Ω)
....................................................................100 W + 100 W
Effective output power during STEREO operation
RMS (1 kHz, 10% T.H.D., at 6 Ω) ................120 W + 120 W
Effective power output during SURROUND operation
FRONT
(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) 100 W + 100 W
(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) 120 W + 120 W
CENTER
(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) ....... 100 W
(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) ........ 120 W
SURROUND
(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) 100 W + 100 W
(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) 120 W + 120 W
SURROUND BACK (KRF-V7200D only)
(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) 100 W + 100 W
(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) 120 W + 120 W
Total harmonic distortion
KRF-V7200D .............................. 0.02 % (1 kHz, 50 W, 6 Ω)
KRF-V6200D .............................. 0.05 % (1 kHz, 50 W, 6 Ω)
Frequency response (IHF'66)
KRF-V7200D : CD/DVD .. 20 Hz – 80 kHz, +0 dB – –3.0 dB
KRF-V6200D : CD/DVD .. 20 Hz – 70 kHz, +0 dB – –3.0 dB
Signal to noise ratio (IHF'66)
CD/DVD .................................................................... 100 dB
Input sensitivity / impedance
CD/DVD, AUX, MD/TAPE, VIDEO 1, VIDEO 2 ...550 mV / 40 kΩ
AV AUX .......................................................550 mV / 50 kΩ
DVD/6CH INPUT .........................................550 mV / 27 kΩ
Output level / impedance
REC OUT (MD/TAPE, VIDEO 1) ................ 550 mV / 470 Ω
PRE OUT (SURROUND BACK) (KRF-V6200D only)
.......................................................................0.9 V / 2.2 kΩ
PRE OUT (SUBWOOFER) ............................1.5 V / 1.5 kΩ
Tone control
BASS ..................................................... ±10 dB (at 100 Hz)
TREBLE ................................................ ±10 dB (at 10 kHz)
DIGITAL AUDIO section
Sampling frequency ..........32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Input level / wave length
Optical .....................–15 dBm – –21 dBm / 660 nm ±30 nm
Input level / impedance
Coaxial ........................................................ 0.5 Vp-p / 75 Ω
VIDEO section
VIDEO inputs / impedance
Composite ...................................................... 1 Vp-p / 75 Ω
VIDEO outputs / impedance
Composite ...................................................... 1 Vp-p / 75 Ω
S-VIDEO inputs / impedance
Y-singal ........................................................... 1 Vp-p / 75 Ω
C-singal ................................................... 0.286 Vp-p / 75 Ω
SPECIFICATIONS
S-VIDEO outputs / impedance
Y-singal ........................................................... 1 Vp-p / 75 Ω
C-singal ................................................... 0.286 Vp-p / 75 Ω
COMPONENT VIDEO inputs/ impedance
Y-signal ........................................................... 1 Vp-p / 75 Ω
CB/ CR-signal ............................................. 0.7 Vp-p / 75 Ω
COMPONENT VIDEO outputs/ impedance
Y-signal ........................................................... 1 Vp-p / 75 Ω
CB/ CR-signal ............................................. 0.7 Vp-p / 75 Ω
FM tuner section
Tuning frequency range .....................87.5 MHz – 108.0 MHz
Usable sensitivity (DIN at 75 Ω)
MONO .............1.3 µV / 13.2 dBf (40 kHz DEV., S/N 26 dB)
STEREO ..........45 µV / 42.1 dBf (46 kHz DEV., S/N 46 dB)
Total harmonic distortion (DIN at 1 kHz)
MONO ................................................0.2% (71.2 dBf input)
STEREO ............................................0.8% (71.2 dBf input)
Signal to noise ratio (DIN weighted at 1 kHz)
MONO ........................ 65 dB (40 kHz DEV., 71.2 dBf input)
STEREO .................... 60 dB (46 kHz DEV., 71.2 dBf input)
Stereo separation (DIN 1 kHz) ..................................... 36 dB
Selectivity (DIN ±300 kHz) ........................................... 64 dB
Frequency response (30 Hz – 15 kHz) ........+0.5 dB, –3.0 dB
AM tuner section
Tuning frequency range ........................ 531 kHz – 1,602 kHz
Usable sensitivity (30% mod., S/N 20 dB) 16 µV / (600 µV/m)
Signal to noise ratio (30% mod.) 50 dB (60 dBµV EMF input)
USB section
Usable USB device ........................ USB Mass Storage Class
Interface ..............................USB 1.1 (Full speed) compatible
Maxmum current drain ............................................... 500 mA
General
Power consumption
KRF-V7200D ............................................................. 240 W
KRF-V6200D ............................................................. 250 W
Standby power consumption .........................less than 0.6 W
AC Outlet SWITCHED
Australia ................................................. 1 (total 90W max.)
Other countries ...................................... 2 (total 90W max.)
Dimensions ......................................... W: 440 mm (17-5/16")
.............................................................. H: 159 mm (6-1/4")
.......................................................... D: 345 mm (13-9/16")
Weight (net)
KRF-V7200D ............................................... 9.6 kg (21.2 lb)
KRF-V6200D ............................................... 8.3 kg (18.3 lb)
Notes:
1. Kenwood follows a policy of continuous advancements
in development. For this reason specifications may be
changed without notice.
2. The full performance may not be exhibited in an extremely
cold location (under a water-freezing temperature).
Advertisement
