Samsung HT-DL100 Instruction Manual page 21

To Change the Program
1
Press the Up/Down (
button to select the track
number to be changed.
4
Press the Enter button.
¥
The cursor moves to the
number below.
To delete the entire Program
¥
Press the Stop (
¥
Press the Stop (
¥
Press the Open/Close (
The disc tray will open and then close. The program will then
be deleted.
When you have entered a
wrong number
Press the Clear button.
¥
When you want to delete a selection during
programming, select the track (or chapter, or title) to be
deleted and then press the Clear button.
/ ) Press the Enter button to
select the title or chapter to be
changed.
¥
The cursor moves to the next
number when the Enter button
is pressed again.
Repeat steps 1-4 above to
change the program.
) button twice during playback.
) button once when in the Stop mode.
) button on the main unit.
Clear
2
Press the Clear button and
then press the Number
buttons.
¥
5
3
You can use also just the
Left/Right ( / ) button.
You can program or change
particular tracks for VCD or CD
discs in the same manner.
20