Samsung HT-DL100 Instruction Manual page 11

Connect Antenna
AM Loop Antenna
1. Complete assembly of the supplied AM loop antenna by
rotating the base and snapping it into place.
2. Connect the two wires from the AM loop antenna to the AM
ANTENNA connector on the back panel. Press down on the
thumb lever to insert each wire, and then release to lock the
wires in place.
FM Antenna
Connect the supplied FM antenna to the "FM 75Ω COAXIAL"
connector on the back panel. If noise or interference occurs, use
an external antenna with a 75Ω coaxial cable (not supplied).
Connecting your System to the Power Supply
The main lead must be plugged into an appropriate socket.
Before plugging your system into a main socket, you must check
the voltage setting (OPTIONAL). If the voltage of the socket does
not correspond to the setting on the rear of the unit, you may
seriously damage your system.
1. Check the position of the voltage selector on the rear of the
system (OPTIONAL).
2. Plug the main lead (marked AC Cord on the rear of the
system) into an appropriate socket.
3. Press the On/Standby button to switch your DVD Player
system on.
ANTENNA ANTENN
VIDEO S-VIDEO
VIDEO OUT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
SPEAKERS
IMPEDANCE
A
AM
FM
75
Connect the supplied
AM and FM antennas
10