Clock - Philips FW-C85 Manual

All manuals and user guides at all-guides.com
RECORDING
23
4 Press DUB (HSD) once for
normal speed dubbing or twice
(within 2 seconds) for high speed
dubbing.
™ "NORMAL" (normal speed) or
"FAST" (high speed) will be
displayed, followed by "DUB" with
"! or @" scrolling left or right
depending on the tape side
selected.
™ The
appears on the display
HSD
during high speed dubbing.
• Dubbing will start immediately.
™ The
starts flashing.
REC
5 Press Ç to stop dubbing.
Notes:
– Only å mode is available during
dubbing.
– At the end of side A, flip the tapes to
side B and repeat the procedure.
– Dubbing of tapes is only possible from
tape deck 1 to tape deck 2.
– To ensure good dubbing, use tapes of
the same length.
– During high speed dubbing in Tape
mode, the sound is reduced to a low
volume.
– You can listen to another source while
dubbing.
pg 01-28/C85/37-Eng 23
CD Synchro Start
Recording
1 Load a blank tape into tape deck 2
and a disc into a disc tray.
2 Press CD to select CD mode.
• You can program the tracks in the
order you want them to be recorded
(see Programming Tracks). If not,
select the disc by pressing CD 1•2•3
and the tracks are recorded
according to the order on the
selected disc.
3 Press RECORD to start recording.
™ The
starts flashing.
REC
• CD will start playback automatically.
View Clock
4 Press Ç to stop recording.
You can view the clock (if it is set) if the
system is in Standby mode or when any
One Touch Recording
sound source is selected (CD, TUNER,
etc.). The clock will be displayed for
• For One Touch Recording, as soon as
you press RECORD, the current about seven seconds.
source (CD, TUNER or AUX) will be
• Press CLOCK/TIMER briefly (or
recorded on tape deck 2.
CLOCK on the remote control).
™ "PM 10:38 or 22:38" (the
1 Load a blank tape in tape deck 2.
2 Press RECORD to start recording.
™ The
starts flashing.
REC
3 Press Ç to stop recording.
™ "--:--" will be displayed if the
Note:
– When you press RECORD while in
TAPE mode, "SELECT SOURCE" will
Note:
– When the system goes into low power
be displayed. One Touch Recording is
standby mode, the clock setting will not
not possible in TAPE mode.
be displayed.

CLOCK

MINI HIFI SYSTEM
STANDBY
ON
POWER SAVE
IR SENSOR
CD 1•2•3 FM•AM TAPE 1•2
C1 • 2 • 3 CD BAND TUNER TAPE
SEARCH•TUNING STOP•CLEAR PLAY PAUSE PREV
CLOCK/
DUB
PROG DIM A. REV
TIMER (HSD)
BASS
wOOx
PLUS LEVEL
TECHNOLOGY
Clock Setting
The clock can be set in either 12- or
24-hour mode, e.g. "AM 12:00" or
"00:00". Before setting the clock, you
must be in the View Clock mode.
1 Press CLOCK/TIMER to select
clock mode.
2 Press PROG (on the system only) to
select 12- and 24- hour mode.
™ If 12-hour mode is selected, "AM
current time) will be displayed
12:00" starts flashing.
depending on whether you have
™ If 24-hour mode is selected,
selected 12- or 24-hour mode.
"00:00" starts flashing.
3 Set the hour with à or á on the
clock is not set.
system.
4 Set the minute with í or ë on
the system.
2/16/00, 9:03 AM
CDR/DVD
AUX CDR
PRESET
SIDE NEXT
RECORD
TREBLE
3139 116 19591 (ENG)