Assembly - Blumfeldt Niagara Manual

EN
12

ASSEMBLY

The unit is already wired. You do not need to carry out steps 1 and 2 yourself
when you put the unit into operation for the first time.
1. Connect the pump to the hose (1). Pass the power supply cable through
the hole and twist the coupling of the power supply cable together with
the coupling of the pump (2).
2. Plug the power supply cable into the power supply unit (3).
3. Fill the container with water. The water level must not reach the height of
the cable duct.
4. Plug the power plug into a mains socket. When used outdoors, the socket
outlet must be suitable for outdoor use.
10029932
10029934