Led Intensity - Philips ILS-CL-8RES User Manual

While in the Addressing Mode, the device will transmit a Network
Test Command every 2 seconds (ON/A LED will blink). All
devices on the network will blink an LED to indicate their reception
of this command. If a receiving device matches the transmitted ID,
it will blink all of its LEDs. Those devices that are capable of being
polled will return a Network Test Response if the transmitted ID
matches their own ID. If the transmitting device sees a Network
Test Response, it will double blink its ON/A LED. This is useful
for network testing and to determine if the ID is unique.

LED Intensity

The intensity (brightness) of the LEDs can be set as follows:
A
B
C
D
E
F
G
H
A
B
Step 1. Press and hold D and F for 3 or more
seconds. C-D-E-F LEDs will display four
intensity choices. (Current intensity setting
button will blink.)
Step 2. Press desired intensity button.
Step 3. Press A to save and exit.
Room Combine Switch User's Guide
11