Download Print this page

System Menu; Audio Menu; Radio Operation; Aux Mode Operation - Clarion FZ259 Owner's Manual & Installation Manual

Bluetooth usb/sd/mp3/wma receiver

Advertisement

Available languages

Available languages

System Menu

In any mode, press [ MENU ] button to enter
System Menu. Press [
] or [
] button
to select options, rotate the [ VOLUME ] knob
to adjust a value / option.
CLOCK
Rotate the [VOLUME] knob to set clock, rotate
the [VOLUME] clockwise to adjust the minutes
and counterclockwise to adjust the hours.
12/24H
Rotate the [ VOLUME ] knob to choose time
format: 12 or 24 hours.
BEEP ON/OFF
Rotate the [VOLUME] knob to choose button
Beep sound On or Off.
DIMMER
Rotate the [ VOLUME ] knob to adjust the LCD
display backlight level between High or Low.

Audio Menu

Press [
] button to enter sound effect setting
mode. Press [
] or [
] button to select
options, rotate the [ VOLUME ] knob to adjust
a value / option.
EQ (Preset Equalizer Setting)
Rotate the [VOLUME] knob to change EQ:
Flat->Jazz->Pop->Classic->Rock->News->
Urban->Rave->Movie->Techno->User
When the [EQ USER] is appear, press the
[MUTE] button to enter into below option and
rotate the [VOLUME] knob to adjust a value:
BASS(bass): range -7 to +7
MID(middle): range -7 to +7
TREB (treble): range -7 to +7
XBS On/Off
Rotate the [VOLUME] knob
to turn On or Off
the X-BASS bosster function.
SUB On/Off
Rotate the [VOLUME] knob to
select subwoofer
between ON and OFF
DIS-CON / RE-CON
Disconnect / Re-connect currently connected
mobile phone.
Press the [MUTE] button to disconnect /
Re-connect.
DEFAULT VOL
Rotate the [VOLUME] knob to adjust the default
volume.
DX / LO (radio mode)
Rotate the [VOLUME] knob to choose radio
Local or distant at RADIO mode.
LO: Only stations with strong signal can be
received.
DX: Stations with strong and weak signals
can be received.
TUNE AREA (radio mode)
Rotate the [VOLUME] knob to select suitable
country region:
U.S.A (United States)
LATIN (Latin America)
EUROPE (Eastern/Western Europe)
ASIA (Asia Pacific)
AUS (Australia)
SUB LPF (SUB ON)
Rotate [VOLUME] knob to adjust the subwoofer
Low Pass Filter range: 80HZ/120HZ/160HZ
SUB GAIN (SUB ON)
Rotate the [VOLUME] knob to adjust the
subwoofer gain range: 0 to 12
BAL (Balance)
Rotate the [VOLUME] knob to adjust the
balance between the right and left speakers
from 10R (full right) to 10L (full left).
FAD (Fader)
Rotate the [VOLUME] knob to adjust the fader
between the front and rear speakers from
10R (full rear) to 10F (full front).

Radio Operation

Select Radio as Playing Source
Press the [ SOURCE ] button to select the
RADIO mode.
Selecting the Radio Band
Press the [ BND / SEARCH ] button on the
front panel to select one Radio band among F1,
F2, F3, AM.
[
] Tuning Up / [
]
Tuning Down Buttons
1. Press the [
] / [
] button to seek to
the next strongest station.
2. Press and hold the [
] / [
] button
change intervals step by step.
Preset Scan
Preset scan receives the stations stored in preset
memory in order. This function is useful when
searching for a desired station in memory.
1. Press the [AS] button.
2. When a desired station is tuned in, press the
[AS] button again to continue receiving
that station.
Auto Store
Only stations with sufficient signal strength will
be detected and stored in the memory.
Press and hold the [AS] button to start
automatically select six strong stations and store
them into six presets. The new stations replace
any stations already stored in the band.

AUX Mode Operation

Press the [ SOURCE ] button on the front panel
to select "AUX IN".
AUX IN is just for audio content with 3.5mm
Jack connector plugged into audio-in socket on
the front panel.
Manual Store
When one expected radio station has been
detected, press and hold number button 1-6 to
store it in the memory.
Recall the Stored Stations
Press one numeric button among 1 to 6 on the
front panel to select the corresponding stored
stations.
Local Seeking
When LOCAL seeking is ON, only those radio
stations with strong radio signal could be
received.
To select LOCAL function, press the [ MENU ]
button on the front panel, then press the [
]
/ [
] button repeatedly until LO or DX display
on the LCD, rotate the [VOLUME] knob to select
local or distant mode.
Area Set
This option allows you to select the appropriate
frequency spacing for your area.
1. Press the [MENU] button.
2. Press the [
/
] button to select "AREA"
3. Rotate the [VOLUME] knob to select:
"U.S.A", "LATIN","EUROPE", "ASIA" and
"AUSTRALIA".
4. Press the [MUTE] button to confirm.
Portable audio
Left Track
player, etc..
Right Track
Ground
3.5mm Cable (not included)
FZ259
5

Advertisement

loading