Page 1
IFM - CDX Interface Interface “A”+ Cardax FT PM35v3 Australia Installation Installation Installation Guide RDCCO Pty Ltd Unit 3 / 9 Unit 3 / 9 - 11 South Street Rydalmere NSW 2116 Telephone: 61 2 9352 1777 Email: support@permaconn.com Web site: www.permaconn.com...
Page 2
Introduction The PM35 v3 has an onboard interface “A” module and is designed to provide Serial Data communication via RS232 between the Cardax panel the PM35’s “RX” & “TX” terminals. Setup of Cardax panel Set up Cardax FT Dialler 3000 or Cardax FT Dialler 5000 commands as normal in Cardax control center.
Page 3
Alarm Panel Interface Installation. The PM35 v3 has an on board interface “A” Cardax PM35 Connect “Blue” cable to ‘RX’ Transmit Connect “White” cable to “TX” Receive Connect “Black” cable to “-ve” Permaconn PM45 v3 PM 35 v3...