Installation Notes; Installation Requirements; Surrounding Area; Electrical Connection - Miele PFD 101 U Installations Plan

en - Installation notes
Installation re-
quirements

Surrounding area

Vapor-barrier film
for built-in appli-
ances
Electrical connec-
tion
Plug connection
Hard-wired
Equipotential
bonding and
grounding
4

Installation notes

For safe installation and commissioning of the dishwasher please
read the installation plan, the service documentation, the installa-
tion diagram, and the operating instructions.
This installation plan includes the dimensions of the appliance, the
technical data, and the requirements to be met on site for the installa-
tion of the dishwasher.
Installation and commissioning work should be performed by a quali-
fied and trained service technician in accordance with local and na-
tional safety regulations.
Installation must comply with all local codes and regulations.
Condensate can build up in the area surrounding the dishwasher. Any
cabinetry and fittings in the room must, therefore, be suitable for this
purpose.
The vapor-barrier film supplied with the dishwasher protects the
countertop from damage caused by steam when the door is opened.
Attach the vapor-barrier film above the door, underneath the counter-
top.
All work on the electrical connection should be carried out by Miele
Service, an authorized Miele dealer or a qualified service technician.
The dishwasher should be connected to the electricity supply via an
electrical socket outlet.
If the dishwasher is hard-wired to the power supply, an appropriate
circuit breaker for the circuit in compliance with local code must be
used.
The electrical socket outlet and the power switch must be accessi-
ble after the appliance has been installed. This is to enable any ser-
vicing work.
The power cord must be protected from the risk of thermal damage.
This machine must be grounded in accordance with local code.