Advertisement
Quick Links
Quick
START GUIDE
1
Get Everything Out
Take the bike out of the carton
and carefully remove all foam
protective sheets, cable ties and
cardboard.
Tip: Use scissors to ensure you
don't damage the bike.
2
Get It Together
Ensure the fork is front facing. Position
the front wheel in the fork, then tighten
the axle nuts by hand. Check that the
wheel is equally spaced between the
fork tubes, then tighten with a wrench.
Tip: Ensure the wheel
is positioned correctly
so that the fender
(mudguard) is facing
the rear of the bike.
Electric Bicycle (Unisex)
3
Fender
Screw It
Screw the fender (mudguard) in at the top of the
crown fork.
Tip: Make sure that the fender isn't rubbing against
the wheel, if it is, the fender may be screwed in too
tightly, loosen slightly and check again.
Hit The Breaks
The breaks have already been adjusted, however, if
they require some tweaking, please follow the
instruction manual.
Model: ESTC27U
Advertisement
Related Manuals for Estate City ESTC27U
Summary of Contents for Estate City ESTC27U
- Page 1 Quick Electric Bicycle (Unisex) Model: ESTC27U START GUIDE Get Everything Out Take the bike out of the carton and carefully remove all foam protective sheets, cable ties and cardboard. Fender Tip: Use scissors to ensure you don’t damage the bike. Get It Together Screw It Ensure the fork is front facing.
- Page 2 The Handlebars The Seat Insert the handlebar stem in the fork tube to the minimum Undo the clamp on the seat pole tube, insertion line, then screw in to then insert the seat post into the frame secure. to the suitable height, ensuring you Undo the handlebar clamp and reach the minimum insertion line.
Need help?
Do you have a question about the City ESTC27U and is the answer not in the manual?
Questions and answers