Scanning - Canon FB630U User Manual

Scanning

Once you have set the magnification and scan mode, you may proceed with the scan.
Once the scan is complete, Plug-in Module CS-U automatically closes and returns to the
application software, such as PhotoDeluxe 2.0. The following provides an example of
scanning from within PhotoDeluxe 2.0.
To Initiate the Scan
Specify the Scan Area.
See operating procedures
Click on the [Scan] button.
• The image will begin to be scanned.
• When complete, the Plug-in Module CS-U control panel will close and the Save file
dialog box will display. To save an image file, see Saving Scanned Images
Hint
• The scan button [
than 64 x 64 pixels) or not specified.
• The scan cannot be performed if the required memory is larger than the free
memory.
(p. 34).
] cannot be clicked if the scan area is set too small (less
37
S T E P 3
(p. 37).