Scanning Buttons - Canon CanoScan D1250U2F User Manual

chapter 3
What is on the
screen?
Contents
Glossary
Index

Scanning Buttons

Preview Button
Click the Preview button to pre-scan the image and display it in the Preview
Area so you can decide whether the image needs any adjustments or if you
want to apply any special effects.
Zoomed Image: Click this button after cropping the previewed image to
perform the enlarged preview. You can repeat this operation up to 15
times. When you click [Cancel] button, the enlarged preview image will be
reset to the original preview.
Scan Button
Click the Scan button to scan the image on the scanner with any special
effects or adjustments that have been applied and send the scanned image
to the software application from which you launched ScanGear CS-U.
• After you click the Scan button, the Scanning dialog box
is displayed. Click the Cancel button in this dialog box to
cancel the scan operation.
Note
Clear Button
Click the Clear button to clear the settings for the preview image displayed
in the preview area. Does not clear (delete) the image itself.
• Clicking the Clear button while pressing the [Ctrl] key
clears the image in the preview area.
Note
15