1. Manuals
  2. Brands
  3. Totem Manuals
  4. Motherboard
  5. TM-P2LX
  6. User manual

Totem TM-P2LX User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
System Chipset
CPU
Memory
I/O
BIOS
Expansion slots
Voltage
Dimension
Others
TM-P2LX User's Manual
Introduction
A. Specifications
Intel 82440 LX chipset.
Intel Pentium II processors, support
233/266/300/333/366 MHz.
Expandable to 384MB (3 banks) with three 168-
pin DIMM socket (support 3.3 V SDRAM RAM).
Winbond 83977, two high speed 16550
compatible serial ports, one Multi-Mode.
Parallel Port support SPP/EPP/ECP standard
mode.
Two onboard PCI IDE Ports (32 bit data transfer).
LS-120/ ZIP FDD, IrDA/ ASK IR/ Consumer IR.
Dual USB ports
Support two 360/720KB/1.2/1.44/2.88MB floppy
disk devices.
One PS/2 Mouse port.
Award System BIOS installed in socket (Flash
and PnP).
One AGP slot, four PCI Master Slots and three
16-bit ISA Slots.
Auto 1.8V-3.5V
4-layer PCB, size (300mm x 190mm).
Support BIOS setting CPU type (Jumper-less),
CPU Auto Temperature Sensor & Music Alarm,
voltage monitor and CPU Fan monitor , Bus
Master/ Ultra DMA/33, ACPI, AGP Bus, Keyboard
Power On, PS/2 Mouse Power On, Modem Ring
On.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TM-P2LX and is the answer not in the manual?

Questions and answers

Related Manuals for Totem TM-P2LX

Summary of Contents for Totem TM-P2LX

  • Page 1 TM-P2LX User’s Manual Introduction A. Specifications System Chipset Intel 82440 LX chipset. Intel Pentium II processors, support 233/266/300/333/366 MHz. Memory Expandable to 384MB (3 banks) with three 168- pin DIMM socket (support 3.3 V SDRAM RAM). Winbond 83977, two high speed 16550 compatible serial ports, one Multi-Mode.
  • Page 2 TM-P2LX User’s Manual Setup Guide A. Layout Diagram...
  • Page 3 TM-P2LX User’s Manual B. Note to Installing the Mainboard Touch the non-coated area on the computer case or use a grounded wire to release static electricity before you open the anti-static electricity bag and take out the mainboard. It's likely to damage the mainboard components while taking out the board without first releasing static electricity.
  • Page 4 TM-P2LX User’s Manual 2. Select "CPU Speed" and press "PgUp" or "PgDn" to set the CPU ratio and frequency. The available options are: Intel PII 233MHz (66X3.5), 266MHz (66X4), 300MHz (66X4.5), 333MHz (66X5), 366MHz (66X5.5) and "Manual". To set the CPU manually, please note the following: CPU Speed: "Manual"...
  • Page 5 TM-P2LX User’s Manual D. EDO/ SDRAM Installation Procedures:  A 168-pin DIMM can support up to 384MB 3.3V EDO/ SDRAM.  Default setting: 3.3V. (Only)  To avoid compatibility and reliability problems, you are recommended to test the 168-pin SDRAMs before buying them since the PCB specifications differ.
  • Page 6 TM-P2LX User’s Manual  Change nothing if EDO RAM is used. BIOS automatically detects the RAM type. MEMO for Installing System:  ⊕ Concerning memory setup, you can find how to from “Chipset Feature Setup” under BIOS setup. However, to avoid system unstable or system hang, user without engineering background is not suggested to change BIOS set up.

  • Page 7: Other Jumper Settings

    TM-P2LX User’s Manual E. Other Jumper Settings  Speaker: Connect to the system’s speaker for beeping.  Keylock: Keyboard lock switch and Power LED connector. Reset:  Short to restart system.  HDD LED: LED ON when on board PCI IDE hard disk activates.
  • Page 8 TM-P2LX User’s Manual Turn off the system and short pins 2-3 to clear CMOS. Then short pins 1-2 before turning it on. Normal operation(Default). for clearing CMOS Data. CPU Cooler Fan connector  This is the connector for CPU cooler. Never use the jumper to short the connector.

  • Page 9: Keyboard/ Ps/2 Mouse Power On And Modem Ring On

    TM-P2LX User’s Manual G. Keyboard/ PS/2 Mouse Power On and MODEM Ring on  To make sure the 5VSB signal nearly to 750mA (Amperage) from ATX Power Supply, or if your keyboard consuming power than 300mA, it's better to upgrade your ATX Power Supply to 1A for working perfectly.
  • Page 10 TM-P2LX User’s Manual PS/2 Mouse Right It will power on the system by PS/2 mouse Right. Button Only Only the power button can power on the system.  Modem Ring On Function Operation: ROM PCI / ISA BIOS (2A69JTJ9) POWER MANAGEMENT SETUP...

  • Page 11: Fan Monitoring

    TM-P2LX User’s Manual When Modem Ringing Signal Active, System will wake-up. H. System Health Monitor  Fan Monitoring: There are two fan connectors, one is for CPU, the other can be a housing fan. When the fans speed is working abnormal, there will be warning (Speaker Alarm) through application software such as SM10(Small Icon for System Monitoring) to notify user.

  • Page 12: System Voltage Monitoring

    J16.  System Voltage Monitoring: TM-P2LX is featured with a voltage monitoring system. When you turn on your system, this smart design will keep on monitoring your system working voltage. If any of voltage is over the component's standard, there will be Speaker Alarm though application software SM10 (Small Icon for System Monitor) for a warning to user.

Table of Contents