Important Notes; Important Safety Instructions; Product Overview - Elecro Engineering H.R.UV-C SPA-STANDARD Installation & Operating Manual

IMPORTANT NOTES

Thank you for purchasing the H.R.UV-C SPA pool sanitising system, the latest in high reflection UV
technology, manufactured to the highest standards in England.
To ensure years of trouble-free service, please read and follow these instructions for proper installation,
maintenance and use. Incorrect installation will affect your warranty.
Please retain this manual for future reference.

1. IMPORTANT SAFETY INSTRUCTIONS

WARNINGS:
• Read the maintenance instructions before opening the appliance.
• Do not operate the ultraviolet-C emitter when it is removed from the appliance enclosure.
• Unintended use of the appliance or damage to the housing may result in the escape of
dangerous ultraviolet-C radiation. ultraviolet-C radiation may, even in little doses, cause
harm to the eyes and skin.
• This unit must be earthed.
• Power must be supplied through a Residual Current Device (RCD) with a rated residual
operating current not exceeding 30mA
• Do not run this unit dry
• Do not cover this unit
• The unit must not be submerged in water
• Carefully examine the unit after installation. It should not be powered on if there is water
on any parts not intended to be wet
• If the unit shows any sign of water leakage immediately disconnect power supply
• If the quartz sleeve is cracked, replace it immediately
• To avoid injuries young children should never be allowed near UV steriliser
• Failure to disconnect the power from the UV steriliser and pump before servicing or
maintenance could result in personal injury or property damage.

2. PRODUCT OVERVIEW

The H.R.UV-C SPA is available in 30W single tube format.
3