Windsor Sensor S12 Maintenance Manuallines

Windsor Sensor
Poor or No Pickup
These are general maintenance guidelines.
Please consult your owner's manual prior to performing any repairs or maintenance on this machine.
Difficulty Tools Req. Check vacuum bag and filters
Low No
Low Yes
Low Yes
Low Yes
Low Yes
Windsor Sensor
No Power
Difficulty Tools Req. Check the outlet
Low Yes
2
Call: 1-800-USA-CLEAN (800-872-2532)
- if bag is full or damaged, replace the bag.
Parts: Bag
- if filters are clogged/dirty/damaged, replace the filters.
Parts: Filter
Note: See Replacing the Bag and Microfilter on page 3.
See Replacing the Exhaust Filter on page 4.
Check hose for clog/damage
- remove clog with a wire coat hanger or flat tip screwdriver. If hose is damaged, replace the hose.
Parts: Hose
Note: See Removing a Clog on page 5.
Check brush roller
- if brush roller is damaged, replace the brush roller.
Parts: Hose
Note: See Replacing the Brush Roller on page 6.
Check the belt
- if belt is damaged, replace the belt
Parts: Belt
Note: See Replacing the Belt on page 6.
- Try another outlet, if outlet is okay, change the cord and/or switch
Parts: Cord
Switch
Note: See Replacing the Power Cord and Switch on page 8.
Click: www.usaclean.com Fax: 1-888-USA-CLEAN (888-872-2532)
Upright Vacuum
Vacuum