Page 1
ASSEMBLY INSTRUCTION 3 Piece Outdoor Set ITEM CODE:CS63914 For any assistance with assembly or for missing parts please Contact with us Email: patiopostservice@lhgst.com Web: www.lhgst.com Adress:NO.99 South Heyang Road,Dayang Street, Linhai,zhejiang,China Page 1...
PRE-ASSEMBLY PREPARATION Before you start: 1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product 2.Take care when lifting. Product should be assembled as near as possible to the point of use 3.Ensure that you have all required contents for complete assembly 4.Always read the assembly instructions carefully before beginning assembly.
Page 5
Part A You will need Step 1 • Prepare a floor or benchtop with a protective blanket or cardboard. • Turn upper part (1)over and attach lower part(2)to the upper part,as shown below. • Use bolt (A), threaded through washer(C)and fasten by Allen Key(B).
Page 6
Part A You will need Step 2 • Put the cushion onto chair Page 6...
Page 7
Part B You will need Step 1 • Turn the table top (4)over and attach the legs(5)to the table top,as shown below. • Use bolt (A), threaded through washer(C), and fasten with Allen key(B). Page 7...
Page 8
Part B Step 2 You will need • Attach the other legs(6)to the table top,as shown below. • Use bolt (A), threaded through washer(C)on the every bracket on the legs ,use Allen Key to fasten. • Use bolt (D), threaded through washer(B)on the crossed area of legs ,as shown below and fasten by Allen Key.
Page 9
Part B You will need Step 3 • Put the glass onto the table frame. Page 9...