Common Functions; Smart 2000 Buttons - Robertshaw SENSE SMART 2000 Owner's Manual

COMMON FuNCTIONS

SMART 2000 buttons

MODE
Press this button to cycle the SMART 2000 thermostat through the available
modes: Heat only, Cool only, Auto changeover mode, Emergency Heat (if
fitted), and OFF. When setting the thermostat to OFF mode, the fan mode will
change automatically to Fan Auto mode so the fan does not continue to run
unexpectedly.
NOTE: Not all modes may be active on your thermostat.
O/RIDE (OvERRIDE)
Commercial Programmable Mode
This button initiates the after hours run timer. This is an installer programmed
period which replaces the stop program temperatures and temporarily uses
the start program temperatures for a pre-set 2-hour period. A second press
will cancel the after hours run timer.
Residential Programmable Mode
The O/RIDE button is used to override the current programs time schedule
and to hold the currently set temperature indefinitely. HOLD will be displayed
in the LCD to confirm this function is active. This set temperature will be
maintained until released by pressing the O/RIDE button again.
11