Advertisement
6
7
8
9
1. Insert USB FFC cable into
I/F BD
1. Insert CTRL BD FFC into I/F
BD
2. Assemble Rear Cover with
Middle Frame
3. Fix Rear Cover by screw *4
To attach the monitor stand:
1. Insert the stand base blocks
fully into the stand slot
2. Lift the screw handle and
turn the screw clockwise
3. After fully tightening the
screw, fold the screw handle
flat within the recess
Attach the stand assembly to
the display:
a. Fit the two tabs on the upper
part of the stand to the
groove on the back of the
display
b. Press the stand down till it
snaps into place
- 12 -
Screw-
driver
Torsion of
RC
screw:11±
1Kg
Advertisement
