jablotron FUTURA Installation Manual page 23

JABLOTRON FUTURA
T able no. 2 – button DIP switch T able no. 2
T he firs t thre e s w itche s have to be s e t for the corre s ponding z one (s how n z one no. 1, s am e as in T he firs t thre e s w itche s have to be s e t for the corre s ponding z one (s how n z one no. 1, s am e as in
Fig. 2 6 ). Fig. 2 6 ).
First column (switch no. 4) shows button address.
Second column (switch no. 5) shows that the button is set as a s w itch
Third column (switch no. 6) enables the use of a terminating resistor.
# 2
①
②
Figure 27 – Example of a button configuration: two buttons, **switch** mode, terminating resistor enabled
21/45
s w itch (ON until pressed again).
①
②
INSTALLATION MANUAL
①
②
JABLOTRON LIVING TECHNOLOGY