Honda CITY 2017 Owner's Manual page 93

uuIndicatorsu
Indicator
M (sequential
shift mode)
Indicator/Gear
Position
Indicator
Seat Belt
Reminder
Indicator
*1:Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
92
Name
Comes on when the sequential shift mode is
●
applied.
*
Comes on and the beeper sounds if you are not
●
wearing a seat belt when you turn the ignition switch
to ON ( w *1 .
Blinks while driving if you have not fastened a seat
●
belt. The beeper sounds and the indicator blinks at
regular interval.
Models with front passenger seat belt
reminder
If the front passenger is not wearing a seat belt, the
●
indicator comes on a few seconds later.
Blinks while driving if the front passenger has not
●
fastened a seat belt. The beeper sounds and the
indicator blinks at regular intervals.
On/Blinking Explanation
2 Sequential Shift Mode P. 329
The beeper stops and the indicator goes off
●
when you fasten your seat belt.
Stays on after you have fastened the
●
seat belt - A detection error may have
occurred in the sensor. Have the vehicle
checked by a dealer.
2 Seat Belt Reminder P. 39
Models with front passenger seat belt
reminder
The beeper stops and the indicator goes off
●
when the front passenger fasten their seat
belts.
Stays on after the front passenger has
●
fastened the seat belt - A detection error
may have occurred in the sensor. Have the
vehicle checked by a dealer.
2 Seat Belt Reminder P. 39