uuIf a Tyre Goes FlatuChanging a Flat Tyre
■
Replacing the Flat Tyre
Brake Hub
424
1. Remove the wheel nuts and flat tyre.
2. Wipe the mounting surfaces of the wheel
with a clean cloth.
3. Mount the spare tyre.
4. Screw the wheel nuts until they touch the
lips around the mounting holes, then stop
rotating.
1Replacing the Flat Tyre
Do not over tighten the wheel nuts by applying extra
torque using your foot or a pipe.
Models with wheel cover
Do not attempt to forcibly pry the wheel cover off
with a screwdriver or other tool.
Models with wheel cover and full-size spare tyre
Make sure the wire support ring is hooked into the
clips around the edge of the wheel cover.
Clips
Clips