Honda CITY 2017 Owner's Manual page 80

6. Grab the shoulder part of the seat belt near
the buckle, and pull up to remove any slack
from the lap part of the belt.
u When doing this, place your weight on
the child restraint system and push it into
the vehicle seat.
7. Position the belt properly and push up the
tab. Make sure the belt is not twisted.
Lap/shoulder seat belt without lockable retractor
3. Push down the tab. Route the shoulder part
of the belt into the slit at the side of the
restraint.
4. Grab the shoulder part of the belt near the
buckle, and pull up to remove any slack
from the lap part of the belt.
Tab
u When doing this, place your weight on
child restraint system and push it into the
vehicle seat.
5. Position the belt properly and push up the
tab. Make sure the belt is not twisted.
u When pushing up the tab, pull up the
upper shoulder part of the belt to
remove any slack from the belt.
6. Go to step 8.
uuChild SafetyuSafety of Infants and Small Children
1Installing a Child Restraint System with a Lap/Shoulder Seat Belt
A child restraint system that is not properly secured
will not adequately protect a child in a crash and may
cause injury to the child or other vehicle occupants.
Lap/shoulder seat belt with lockable retractor
After the child restraint system is installed properly,
check if the lockable retractor is activated and the
belt is fully retracted and locked. To deactivate a
lockable retractor, release the buckle and allow the
seat belt to wind up all the way.
Continued 79