Honda CITY 2017 Owner's Manual page 398

■
Inspection guidelines
Every time you check inflation, also examine the tyres and valve stems.
Look for:
• Bumps or bulges on the side or in the tread. Replace the tyre if you find any cuts,
splits, or cracks in the side of the tyre. Replace it if you see fabric or cord.
• Remove any foreign objects and inspect for air leaks.
• Uneven tread wear. Have a dealer check the wheel alignment.
• Excessive tread wear.
2 Wear Indicators P. 398
• Cracks or other damage around valve stem.
uuChecking and Maintaining TyresuChecking Tyres
1Checking Tyres
Taiwanese models
Whenever tyre pressure is adjusted, you must
calibrate the TPMS.
2 Tyre Pressure Monitoring System (TPMS)
P. 338
Middle Eastern and Southeast Asian models
Whenever tyre pressure is adjusted, you must
calibrate the Deflation Warning System.
2 Deflation Warning System (DWS) P. 340
High speed driving
We recommend that you do not drive faster than the
posted speed limits and conditions allow. If you drive
at sustained high speeds (over 160 km/h), adjust the
cold tyre pressures as shown below to avoid excessive
heat build up and sudden tyre failure.
Tyre Size 175/65R15 84T
185/55R16 83H
Pressure Front: 240 kPa (2.4 kgf/cm
Rear: 230 kPa (2.3 kgf/cm
2 , 35 psi)
2 , 33 psi)
397