Amana W11158492A Use And Care Manual page 5

WASH
The washer will fill to the correct water level based on
the load size and the Water Level selection. Certain
cycles may agitate during the fill process to boost
cleaning. You will hear the agitator rotate, followed
by a pause lasting several seconds. When the wash
cycle begins, you will hear the agitator increase
speed. The motor sounds may change at different
stages in the wash cycle while the washer performs
different wash actions.
RINSE
Certain cycles use a spray rinse, which adds water
to the tub while the basket spins. You may hear the
motor turning on briefly (short hum) to move the
basket while filling.
FINAL SPIN
The washer spins the load at increasing speeds for
proper water removal, based on the selected cycle.
CYCLE COMPLETE
Once the cycle is complete, this light will come on.
Remove the load promptly for best results.
LID LOCKED
The lock feature allows for higher
spin speeds. When the Lid Locked
light is lit, the lid is locked and cannot
be opened without pausing the cycle.
When the light is off, the lid can be
opened.
To open the lid after it has been
locked, press START/PAUSE/Unlock
Lid. The lid will unlock once the
washer movement has stopped.
This may take several minutes if
the load was spinning at a high
speed. Press START/PAUSE/Unlock
Lid again to resume the cycle.
Appearance
may vary.
Appearance
may vary.
5