Canon ScanGear CS-S 4.3 User Manual page 50

CONTENTS
GLOSSARY
INDEX
Test Scanner
The Test Scanner button performs any diagnostic tests the scanner can
perform. Before you begin, make sure the AC adapter is plugged in. For a
flatbed scanner, make sure the document cover, or optional document feeder
is closed, flat on the document glass.
To test the scanner:
1. On the Device page, click Test Scanner. The Scanner Diagnostics dialog box
appears.
2. On the Scanner Diagnostics dialog box, click Start. After a short pause, you
should hear the scanner start to run its diagnostics.
When the test is complete, a message in the Scanner Diagnostics dialog
box informs you of the results.
Chapter 4
Scanning Devices
50
50