Configuring Fax Settings; Linking A Fax Application - Canon ScanGear CS-S 4.3 User Manual

CONTENTS
GLOSSARY
INDEX

Configuring Fax Settings

You can change the application or driver linked to the Fax button on the
ScanGear Toolbox CS bar. By default, the system default fax application or
driver is linked to the button.
Note:

Linking a Fax Application

To link a fax application or driver:
1. On the Fax tab, select an option in the Link To list.
• If you select System Default, the Toolbox button is linked to the MAPI-
• If you select Driver, click the Set button and select the fax driver to link.
• If you select Application, click Browse to locate and select the fax
2. Select Show This Button.
3. Select an Image Type.
If you do not have any fax application or driver in the system,
select System Default to send the image.
compliant fax application. If no system default fax application existed
when ScanGear Toolbox CS was installed, the system default option is
unavailable.
The list of names is collected from available drivers on your system.
application executable that you want to link.
Using ScanGear Toolbox CS-S
Chapter 6
75
75