Installation; Electrical Connection; Front Panel - Sealey Electrospot7001 Instruction Manual

4.

INSTALLATION

 wARNING: unplug from mains power supply before connecting cables and accessories.
6.1.

ELECTRICAL CONNECTION

Ensure that the machine is compatible with your mains supply.
6.2. MANUAL CLAMP, CLAMP STUDDER & GROUND CABLE CONNECTION
6.2.1. Connect the two Dinse plugs into the welder sockets.
6.2.3. Connect the control cable.
5.

FRONT PANEL

Key 1 Spot welding time control
For correction (upwards or downwards) within preset limits, of spot welding time with respect to the preset factory default value.
Key 2 Sheet thickness control
To specify the thickness of the sheet(s) to be welded.
The options with key 3 only work when studder
gun is used.
Key 3
4
fig.2
5
6
Original Language Version
fig.1
7
ELECTROSPOT7001 Issue: 2 - 09/03/10