Table of Contents
Advertisement
8.
MAINTENANCE
WARNING! DO NOT remove any panels without first switching the machine off and unplugging the unit from mains power supply.
8.1.
Periodically, depending on environmental conditions, remove panels and clean dust and metallic particles from inside the welder using
dry, compressed air at no more than 5 bar pressure (wear safety eye protection and dust mask).
Avoid directing compressed air at the electronic circuit board, clean with a soft brush and suitable solvents.
8.2.
Check that all cables are in good condition with undamaged insulation and connections are tight and free of oxidisation.
8.3.
Check that screws connecting the transformer secondary circuit to the welding cable taps are secure and do not show signs of
overheating or oxidation.
8.4.
If the welder operation is not satisfactory, before contacting your service agent, check the following:
a)
With welder connected to mains supply and welder main switch 'Off', green LED should be on. If not there is a supply fault or
the supply voltage is too low.
b)
Thermal protection has triggered (yellow LED flashing). If it has, wait until the LED goes out before re-starting. If necessary
reduce the duty cycle
c)
The connections in the secondary circuit (fuse, arm holders, arms, electrode holder), are not producing high resistance due to
loose screws or oxidised contact surfaces.
d)
The electrode face diameter and the electrode pressure being used are appropriate to the weld being produced.
9.
TROLLEY (OPTIONAL)
9.1.
Trolley (part No. 120.803002) is availaable seperately. This is a heavy-duty trolley which features storage for the slide hammer and
welding gun plus shelves for storing welding accessories.
9.2.
Assemble as pictured in fig.5.
fig.5
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
www.sealey.co.uk
01284 757500
Web
sales@sealey.co.uk
01284 703534
email
ELECTROSPOT7001 Issue: 2 - 09/03/10
Advertisement
Table of Contents
