Advertisement
Quick Links
Ag9050 Power over Ethernet Module (#40012)
The Ag9050 Power over Ethernet Module is designed to be a drop-in Power over Ethernet (PoE) solution
for the WIZnet W5200 Ethernet Board. As long as your network supports power over Ethernet the
W5200 + QuickStart board can both be powered and communicate.
Features
Power over Ethernet for your WIZnet W5200 Board and P8X32A Propeller QuickStart Board
Regulated 5 V output powers your QuickStart Board and other peripherals
Overload and short-circuit protection
Industrial operating temperature range
Key Specifications
Power Requirements: Power Sourcing Equipment (PSE) or Midspan Equipment
Power Output: 9 watt max power output (5 V @ 1.8 A)
Communication Interface: Complies with IEEE 802.3af
Operating temperature: -40 to +185 °F (-40 to +85 °C)
Dimensions: 3.0 x 2.0 in (7.62 x 5.08 cm)
Application Ideas
Remote IP based security system
IP based home automation
Long distance tethered robotics
Additional Items Required
Power Sourcing Equipment (PSE)
or Midspan Equipment
WIZnet W5200 Board (#40002)
P8X32A Propeller QuickStart
(#40000)
Soldering iron
Solder
Safety glasses
Copyright © Parallax Inc.
Arrow.com.
Downloaded from
Web Site: www.parallax.com
Forums: forums.parallax.com
Sales: sales@parallax.com
Technical: support@parallax.com
Ag9050 Power over Ethernet Module (#40012)
Office: (916) 624-8333
Fax: (916) 624-8003
Sales: (888) 512-1024
Tech Support: (888) 997-8267
v1.0 8/6/2013 Page 1 of 3
Advertisement
Related Manuals for Parallax Ag9050
Summary of Contents for Parallax Ag9050
- Page 1 Tech Support: (888) 997-8267 Ag9050 Power over Ethernet Module (#40012) The Ag9050 Power over Ethernet Module is designed to be a drop-in Power over Ethernet (PoE) solution for the WIZnet W5200 Ethernet Board. As long as your network supports power over Ethernet the W5200 + QuickStart board can both be powered and communicate.
- Page 2 The module is pin-keyed, so you cannot insert the module backwards. 3. Use your soldering iron to solder the Ag9050 module into place from the underside of the W5200 module. Apply solder to all of the module’s pins.
- Page 3 Power Sourcing Equipment and begin supplying power to the QuickStart board. Resources and Downloads Check for the latest version of this document and datasheets from the Ag9050 Power over Ethernet Module product page. Go to www.parallax.com and search 40012.