Built-In Pc Operation - Qomo Journey 13 Series User Manual

Built-in PC Operation

1. Select PC signal source to enter PC interface. The following are three ways to select a signal source channel.
 Swipe your finger up from the bottom edge to bring up a toolbar then click input.
 Press SOURCE button on the remote control.
 Press button on the front control panel.
In the signal source page, select a channel and press OK or click the channel icon directly to enter it.
2. Operate the built-in PC in the same way as you operate an ordinary computer.
3. Shut down PC before you turn off the panel. Do not power off a running PC suddenly to avoid data lose. Or you
could also press Power button to turn off PC and panel at the same time.
All manuals and user guides at all-guides.com
26