GE ASM18DK Owner's Manual & Installation Instructions page 14

Window Installation Instructions.
8
Install the Security Bracket and the Foam Top Window Gasket
Attach the security bracket with a type B screw.
A
9
Install the Air Conditioner in the Case
Slide the air conditioner into the case.
A
Reinstall the 2 screws removed earlier on each
side of the case.
Place the bottom inner case gasket between the
B
bottom of the air conditioner and the inside
bottom of the case. Fold up the ends on both
sides and push them in.
Front of air
conditioner.
14
Bottom inner
case gasket
Cut the foam top window gasket to the
B
window width.
Stuff the foam between the glass and the
C
window to prevent air and insects from getting
into the room.
Attach the front grille to the case by inserting the
C
tabs on the grille into the slots on the front of the
case. Push the grille in until it snaps into place.
Guide the lever carefully
through the grille as you
push it in.
Secure the front grille to the case by replacing
D
the screw removed in Step 3. If a screw was not
removed in Step 3, secure the grille with a type A
screw. The installation is now complete.