Positioning The Product; Operation - Silvercrest SMW 700 D2 Operation And Safety Notes

The product is not to be used
if it has been dropped, if there
are visible signs of damage .
Before connecting the product
to the power supply, check that
the voltage and current rating
corresponds with the power
supply details shown on the
product's rating label .
Protect the power cord against
damages . Do not let it hang
over sharp edges, do not
squeeze or bend it . Keep the
power cord away from hot
surfaces and open flames .

Positioning the product

mATTENTION! Do not install
the product above a cooker
or any other heat-generating
device . Installation in such a
location could cause damage
to the product .

Operation

mDANGER! Risk of fire!
Remove all metallic closures
from the packaging of the food
that you intend to heat .
Do not move the product while
it is in operation .
Never operate the product
when it is empty .
Do not place the product on
hot plates (gas, electric, coal
cooking range etc .) . Operate
the product on a level, stable,
clean, heat-resistant and dry
surface .
Do not place flammable
materials close to the product .
The product is not intended
to be operated by means of
an external timer or separate
remote control system .
GB/IE 25