Canon 800II Installation Manual page 45

7
To scan another image, project the image onto the scanner
screen and click [Continue Scanning]. To stop the Scan batch
to printer operation, click [Stop Scanning].
In Semi-auto mode, you can continue scanning simply by pressing the Start
key on the scanner. To stop the Scan batch to printer operation, press the
NOTE
Clear key. The Start Scanning (Continue) dialog box appears and the Scan
batch to printer operation ends.
If you are using the FS Controller III, you can perform continuous scan-
ning from the FS Controller III keyboard. Refer to the FS Controller III
Instructions for details.
8
Check the scanned images.
Chapter 3 Using the Scanner
3
45