Printing Images; Scan Batch To Printer - Canon 800II Installation Manual

Printing Images

To print an image projected onto the screen, you can either send the scanned image
data to the printer (Scan batch to printer) or print an image downloaded to the PC.
The print procedures differ for the two methods.
In the case of Scan batch to printer, the procedure also differs depending on the carrier
used. Refer to the instructions for your carrier for details.

Scan Batch to Printer

In the "Scan batch to printer" method, the image projected on the screen is scanned
and sent directly to the printer.
cally saved, the image should be saved if necessary.
1
Project the image onto the scanner screen.
2
Check [Printer setting...].
3
Select [File]-[Print Format].
• Actual size
Prints at the size shown on the screen, regardless of the paper used for printing and the
resolution at which the image was scanned.
• Fit to paper
If the image size is larger than the paper size, this setting shrinks the image to match
the paper size. If the image is smaller than the paper size, the image is printed at actual
size.
• Actual Pixel
Prints each dot in the scanned image as one dot on the printer. Accordingly, the printed
image is smaller when it is printed on a high-resolution printer that prints smaller dots.
Chapter 3 Using the Scanner
スキャン結果の画像がここに表示されます。
In this mode, because the scanned image is not automati-
3
43