GE AEE12DN Owner's Manual And Installation Instructions page 10

Window Installation Instructions
INSTALL THE CASE IN THE
7
WINDOW
Open the window and mark the centerline of
A
the window stool.
Carefully place the case on the window stool
B
and align the center mark on the bottom front
with the centerline of the stool.
P ull the window down behind the top
C
mounting rail.
NOTE: Do not shut the window so tightly that
movement of the accordion panels is
restricted.
Select the position that will place the sill
D
supports near the outermost point on the sill.
Place the short side of the sill supports, on the
case bottom, toward the window. Attach the
sill supports to the case track hole in relation
to the selected position using 2 Type B screws
in each support.
CAUTION:
conditioner in a window if the bolts do not
contact the window sill.
Adjust the bolt and the nut in each support so
E
that the case is installed with
a slight tilt to the outside. Use a level; no more
than 1/2 bubble will be the correct case slant
to the outside.
CAUTION:
do not contact the window sill or if you have a
window without a sill you must order accessory
kit RAK87 to properly install this air conditioner.
Call 800.626.2002 or visit GEAppliances.com.
Do not install this air
Long side
of sill
supports
OUTSIDE
If the sill support bolts
INSTALL THE CASE IN THE
7
WINDOW (CONT.)
Secure the case to
F
the window stool
by using
3 Type D screws.
P ull the accordion
G
panels to each
window sash track.
Attach them on each
side to the window
sash and the window
stool using
4 Type C screws.
SECURE THE CASE IN THE WINDOW
8
AND INSTALL THE FOAM TOP
WINDOW GASKET
CAUTION:
A
To prevent broken glass
or damage to windows,
on vinyl or other similarly
constructed windows,
attach the support bracket
to the window side jam.
Attach the window
locking brackets (on one
each side) with Type C
screws.
Cut the foam top window gasket to the window
B
width.
C Stuff the foam
between the glass
and the window
to prevent air and
insects from getting
into the room.
NOTE: If the gasket supplied does not fit your
window, obtain appropriate material locally to
provide a proper installation seal.
10
Sill
support
Vinyl
Wood