6854DHR, 6854KGEUDHR, 6857DHR, or 6857KGEUDHR
To Weigh and Calculate BMI
Using Mechanical Height Rod or Entering Known Height
1. Press the ON/OFF key to turn the indicator on.
2. If required, press the ZERO key to zero weight display.
3. Perform tare operation if required.
NOTE: For instructions on using tare, refer to Push Button Tare or Tare Weight Entry in the
MedVue MV1 Owner's Manual (8555-M512-O1) for the 6854DHR or 6857DHR or the
MedVue MV2 Owner's Manual (8555-0530-0M) for the 6854KGEUDHR or
6857KGEUDHR.
4. Press the ID/HEIGHT key.
5. If Centimeters was selected for HEIGHT UNITS in setup, the display will change to show
CENTIMETERS.
a. Use the numeric keys to enter up to 4 digits (# # # . #) for the height in centimeters
and then press the ENTER key.
6. If Millimeters was selected for HEIGHT UNITS in setup, the display will change to show
MILLIMETERS.
a. Use numeric keys to enter up to 4 digits (# # # #) for the height in millimeters and then
press the ENTER key.
7. Assist the patient on the scale.
8. When the weight is stable (STABLE
and BMI displays.
9. If a printer is connected to the scale, press the PRINT key to print a ticket. Note that the
BMI and height display will clear when the ticket prints.
10. Assist the patient off the scale.
11. If a printer is not connected to the scale, the BMI display will clear when the patient is
assisted off the scale, and the weight returns to zero.
1930-M458-O1 Rev-G Bariatric Waist-High 685X Series
OPERATION, CONT.
annunciator will turn on), read the weight, height,
7