A.O. Smith HeatBot Wi-Fi User Manual page 10

Installation (contd...)
• Use Mounting Template to mark holes (Step
1).
• Use a drill bit with diameter of 10 mm to
drill 2 holes at least 80 mm deep in the wall
(Step 3). The two holes should be aligned
horizontally.
Figure 7
1
2
Drilling
Tool
Mount the Water Heater on the Mounting screw through the Wall mount bracket. Tug
downwards on the Water Heater to ensure that the Water Heater is fixed steadily on the Wall
mount bracket.
Figure 9
• Insert the Expansion Anchor into the hole
(Step 1).
• Insert the Mounting screw over the
Expansion Anchor and tighten the
Mounting screw by rotating it till it gets
fixed steadily (Step 2).
Figure 8
80 mm
3
Hole
Concrete Concrete
Wall Wall
Wall Mount
Bracket
Concrete Concrete Concrete Concrete
Wall Wall Wall Wall
6
Expansion
1
Anchor
Concrete Concrete
Hole
Wall Wall
2
Mounting
Concrete Concrete
screw
Wall Wall
Body
cover
Wall Mount
Bracket
Mounting
Screw
Body
cover