Removing A Memory Card - Sony MRW62E-S2 Operating Instructions Manual

Notes
• Use the removable disk icon for the memory
card you are using.
• It may take a while for the removable disk
icons to appear.
• If the removable disk icons do not appear,
follow the steps under "Disconnecting the
Reader/Writer From the Computer" on
page 13 to disconnect the reader/writer, and
then wait at least 5 seconds before
reconnecting it.
If the [Safely Remove Hardware] icon
mentioned in step 1 of "Disconnecting the
Reader/Writer From the Computer" is not
displayed, skip the rest of the procedure and
immediately disconnect the reader/writer.
• Depending on your operating system and
the type of memory card you are using, the
reader/writer drives may be recognized as
"Local Disks" instead of "Removable
Disks," but this will not affect their
operation.
x For Macintosh
1
Insert a memory card into the
corresponding slot.
The removable disk icon appears on the
desktop.
When a volume label is assigned to the
memory card, the volume label will be
displayed together with the removable
disk icon.
2
Use the removable disk icon to
read or write data on the memory
card.

Removing a Memory Card

Note
Be sure to follow the steps described below.
Sony accepts no responsibility for any damage or
loss that results from removing a memory card
without following the procedure described below.
x For Windows
1
Make sure the access indicator
is not blinking.
2
Open [My Computer].
3
Right-click the removable disk
icon, and select [Eject].
4
Pull the memory card straight
out.
x For Macintosh
1
Close the files saved on the
memory card, and exit any
currently running applications.
2
Make sure the access indicator
is not blinking.
3
Drag the removable disk icon to
the [Trash].
Alternatively, select the removable disk
icon, access the [File] menu on the menu
bar, and select [Eject "Untitled"]
* Depending on the memory card, a different
label than "Untitled" may be shown.
4
Pull the memory card straight
out.
*
.
11