Preparation; Charging The Rechargeable Battery; Basic Settings - Steinbach Poolrunner Battery+ Original Owner's Manual

Hide thumbs Also See for Poolrunner Battery+:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 17

Preparation

Charging the rechargeable battery

matching connectors (groove direction),
vertically aligned, same view direction
Charging at a temperature below 10 °C leads to chemical damage to the cell and can cause a
fire.
- Charge the rechargeable battery at room temperature.
Charging process
1
1. Switch off the device before charging.
2. Take the protective cap
3. Connect the charger to the device.
4. Plug the charger into a socket.
The charge control indicator is lit red. The rechargeable battery is charging.
5. When the charge control indicator is lit green, disconnect the charger from the power supply and
the device.
6. Attach the protective cap
The rechargeable battery is charged.

Basic settings

Adjusting the nozzles
The following settings are recommendations. Adapt the basic settings to the actual properties of your
pool.
0°/30°: for most pools
0°/40°: to cover a large cleaning area
20°/20°: for round pools
22
WARNING!
Risk of fire!
off the charging plug
1
11
to the charging plug
1
11
2
.
.
3
1
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hj1103

Table of Contents