Sony TDM-BT10 Operating Instructions Manual page 9


Perform pairing procedure on the Bluetooth audio source
device to detect this unit.
The list of detected devices appears on the display of the Bluetooth
audio source device.
This unit is displayed as "TDM-BT10. "
If "TDM-BT10" is not displayed, repeat from step 1.
Notes
When pairing, be sure to place both the Bluetooth devices within 1 m of

each other.
Some devices cannot display the list of detected devices.

To operate the Bluetooth audio source device, refer to the operating

instructions of the device.

Select "TDM-BT10" on the display of the Bluetooth audio
source device.
4
If Passkey* input is required on the Bluetooth audio
source device, input "0000".
When Bluetooth pairing is complete, the indicator flashes slowly
and pairing information is memorized on this unit.
* Passkey may be called "Passcode, " "PIN code, " "PIN number, " or "Password. "
9
Continued
GB