Pairing; What Is Pairing - Sony TDM-BT10 Operating Instructions Manual

Pairing

What is pairing?

Bluetooth devices need to be "paired" with each other beforehand.
Once Bluetooth devices are paired, there is no need for pairing again,
except in the following cases:
Pairing information is deleted after repair, etc.

This unit can be paired with up to 8 Bluetooth audio source devices.

If a new device is paired thereafter, the device with the oldest
registration among the 8 paired devices is replaced by the new one.
This unit is initialized (page 19). All pairing information is deleted.

Check that the DMPORT function is selected at the connected AV
system before operating the unit.
1
Press and hold the OPR button for  seconds or more.
The indicator starts flashing very quickly and this unit enters pairing
mode.
Note
Pairing mode is canceled automatically if pairing is not achieved within
5 minutes, or manually by pressing the OPR button. If pairing mode is
canceled midway, start over from step 1.
8
GB
O
P R