Assembly - Funkey DP 1088 User Manual

Assembly

Attach the pedal unit ① to the pedal plate. ②. Use the two medium-length screws ③ (4x45)
for this purpose.
Now mount the substructure consisting of pedal plate ② and side parts ④. Insert the four
cylinder nuts ⑤ into the openings at the rear of the pedal plate. Screw in the four long
screws ⑥ (6x50) from the outside and cover them with the plastic caps ⑦.
Securely fasten the console ⑧ to the base using the four short screws ⑨.
Connect the pedal cable ⑩ to the socket on the bottom of the piano and insert the hollow
plug of the power supply ⑪ into the power supply socket on the back of the instrument.
► It may be useful to keep the packing materials in case the instrument needs to be transported to a
distant location.
5