Table of Contents
Advertisement
Available languages
Available languages
4 ASSEMBLY GUIDE
Unpack the piano, stand and all parts out of the box. Please check if all parts are included like listed below.
Piano parts:
A:
M6*22 16x
B:
Washer d6.5mm 16x
C:
Caps
Bench parts:
D:
M6*22 16x
E:
Washer d6.5mm 16x
F:
Caps
Piano Assembly
Attaching the stand:
Begin assembling the piano by attaching the legs of the stand
to the crosspiece:
A. Insert 4 (A) bolts and 4 washers (B) into each side of the
crosspiece.
B. Screw bolts into the brackets on each leg, make sure that
the crosspiece and the feet are all facing towards you.
C. Tighten the screws until the crosspiece is flush with the
leg brackets, and the legs are firmly attached.
16x
16x
Funkey DP-49 Kids
Advertisement
Table of Contents
